+1(323)904-3000 30 www.mobiusa.com
2. Disinfect the thermometer body and the area around the
temperature probe with a slightly moistened cloth using
75% medical alcohol.
Do not use hot steam or ultraviolet radiation for
disinfection. Doing so may damage the thermometer.
Disinfect the thermometer before and after each use.
Disinfect the thermometer for 1 minute, and do not
disinfect the thermometer more than two times
simultaneously.
Clean and disinfect the thermometer below a
temperature of +50°F-104°F10 (°C~+40°C), relative
humidity of 15%~85%RH (no condensation), and
barometric pressure of 86kPa~106kPa.
Maintenance
Preventative inspection & maintenance period
1. Ensure the effectiveness of the thermometer, and check
whether there are any safety hazards during regular use
weekly, e.g., whether the lens is broken, the shell has
cracks, or the sensing head is dirty.
2. Do not use the thermometer if there is a potential safety
hazard. Clean the thermometer if it has not been cleaned
recently.
3. After each use, clean the temperature probe per
instruction in the "Cleaning and Disinfection" chapter.
4. Store the thermometer in a dry, dust-free, and well-
ventilated area. Ensure the thermometer is not exposed
to direct sunlight. Ensure any storage and transportation
environments meet the above requirements.
5. Check regularly for safety hazards.
6. Remove the batteries if the thermometer will not be
used for more than two months.
To Next Page