MOBIKA clim M4 - Electrical Heat Function

FAN- FAN+
MODE
HEATE R SLEEP
CLOCK
TIMER
LOCK
LIGHT
0 0
C / F
19
3.11 ELECTRICAL HEATER FUNCTION(optional only)
Sequence of the operations
Press the assistant ELECTRICAL HEAT
button “ ”, the icon will display on the
LCD, starting the assistant heat; press
this button again, stop the assistant heat.
Press the ON/OFF button “ ”, switch off
the unit.
Next time when this button is pressed, the
unit will operates in this mode by memory.
HEATER
3. USE AND MAINTENANCE
ENGLISH
Press the FAN SPEED button " "
" " , set up the fan speed, " " is
low speed, " "is middle speed,
" " is high speed, " " is auto
speed.
For auto fan, the speed is chosen by the
difference of room temperature and
setting temperature.
or
FAN+
FAN-
Press the ON/OFF button " ", switch on
the air conditioner, it will run by memory
mode.
Press the MODE button set up the mode
to heat “ ”, the unit will run in heating.
Press UP " " or DOWN
adjust the setting up temperature.
" " button, to
MOBIKA Clim