MobileODT EVA 3 Plus - 4.2 Charging the Mobile Device

EVA 3 Plus: Device User Manual
4.2. Charging the Mobile Device
To charge the mobile device when it is fitted within the optical unit, connect
the Micro- USB cable to the charging port built-in to the unit. To access the
port, raise the charging port cover located above the LED light on/off switch..
Connect the cable to a wall socket with the proper USB-electrical port
adapter.
The mobile device should be charged whenever the colposcope is not in use
to ensure proper functionality during the examination.
(figure 16)
26