8.4. HMW Audio Alert
A single chime is sounded to draw your attention to a dangerous headway situation.
The timing of the warning can be customized by the user. (Please refer to Section
10.1.3 for customization instructions.)
8.5. HMW Activation
The visual indication is displayed whenever a car traveling in front of your vehicle is
detected. The audio alert and numerical display are active when you are driving at
speeds greater than 30 km/h (19 mph).
8.6. When are HMW Audio Warnings Not Generated?
While Headway Monitoring and Warning visual indications cannot be disabled, it
is possible to mute this function’s audio alert. HMW will not issue audio warnings
when:
l
You drive at speeds below 30 km/h (19 mph).
l
The Mobileye C2-270 volume level has been set to "0" or the System has been
‘m ut ed ’.
Beseitigung von Problemen und Fehlern
Notice
WARNING!
HMW visual alerts
NOTES:
When a passing vehicle cuts in front of you in your lane and drives away,
a HMW alert is not generated.