10.3. Mute
Option 1: Set volume level to 0
Option 2: To Mute press and hold the Minus (-) button of the display for 1.5
seconds. Then a long bip occurs.
To exit Mute press (+)
Option 3: Press the Camera / Buzzer unit (-) volume control button repeatedly until
no sound is heard. Do not press constantly on button, this will turn system OFF
NOTE:
l
The Forward Collision Warning alerts cannot be muted – they are critical alerts.
l
Muting will disable the HMW and LDW audio alerts.
l
Mute and OFF conditions are not saved by the system. Each time the vehicle is
restarted, the Mobileye C2-270 is ON, and NOT muted.
10.4. Urban FCW Sensitivity
To change the Virtual Bumper sensitivity Press and hold the (+) button and then
immediately press on the (-) button for 1.5 sec.
A red car icon will start flashing and the numerical display will show.
Press the (-) to decrease the VB sensitivity, or press (+) to increase it. (3) Wait 5 sec. for
change to take effect. The VB sensitivity is limited between 0.5 meters and 2 meters.
The numerical values represent Distance in Meters.
By Default and Virtual Bumper Sensitivity is set to 1.2 meters.
Increasing this value will make the VB more sensitive (alerts will be sounded earlier)
Decreasing this value will make the VBS less sensitive (alerts will be sounded later).
l
Changes to the Urban FCW Sensitivity can be done only when the vehicle is at a
standstill (at Zero Speed).
To Next Page
Loading...
