Mocka Jack Buffet - Mounting the Doors; Attaching Doors to Cabinet Unit; Door Alignment Adjustment

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11
12
Secure door panels [12] and [13] to the main unit by attaching the other end
of the hinges (Q) with 16x screws (R) as shown. Tighten with a screwdriver.
Insert 5x small bolt (O) into panel [14]. Tighten with a screwdriver.
X3
O
O
O
O
O
14
R
R
R
12
13
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.