Mocka Jack Buffet - Drawer Construction - Part 1; Inserting Bolts into Drawer Base; Assembling Drawer Sides and Base

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13
14
Attach panels [15], [16] and [17] to panel [14] with 1x dowel (A) and
secure with 5x small locking nuts (P). Tighten with a screwdriver.
Slide panel [18] along the grooves between the side panels [15], [16] and
[14] to form the base of the drawer.
P
P
A
P
P
14
15
17
16
15
16
18
X3
X3
P