12
Fig. 2 - Installation guide
Recommended Clearances
200 mm - 8 in.
Clearance right side
75 mm - 3 in.
Clearance rear
WARNING
Installation on the counter:
For cutting the counter refer to
cutting template placed inside
the package.
WARNING
Installation on the counter with
scales:
The thickness of the counter must
be between 20mm and 100mm.
WARNING
This machine should not be
installed in kitchens.
WARNING
Replace fuses with the same size,
type and rating F1 = 2A, 250V
150 mm - 6 in.
Clearance above
75 mm - 3 in.
Clearance left side
350 mm - 14 in.
Minimum clearance between
Espresso Taps
To Next Page
Loading...
