35
The keypad has two functions. The rst is for control of the espresso. The second is for programming individual software parameters.
The programming of the individual parameters is possible only using the buttons in the group 1 (group starting from the left).
Programming Keypad
Button
Description
This button is used to control the brewing of the single espresso. It is also used in the programming of the individual
parameters such as the “back” button in the menu.
For simplicity's sake in this manual it will be represented by this symbol
with the name T1.
This button is used to control the brewing of the double espresso. It is also used in the programming of the
individual parameters such as the “forward” button in the menu.
For simplicity's sake in this manual it will be represented by this symbol
with the name T2.
This button is used for a continuous control of the brewing of the espresso. It is also used in the programming of
the individual parameters such as the “enter” button in the menu.
For simplicity's sake in this manual it will be represented by this symbol
with the name T3.
To Next Page
Loading...
