modbar av Series - Page 42

EN
42
Display Operating Procedure
Description
G1█ MODBAR G2█
163Puls 0Puls
4
Technical” Programming Level
While the espresso machine is on, press and hold the button T3 . After approximately 10 seconds the
following display appears.
Enter Password
5
This is the “Technical” programming level. Enter the password and press the buttons T1 and T2 to move
between the available parameters, press the T3 button to conrm.
NOTE: You must scroll to the exit menu to exit the programming mode, or press at the same time the buttons
T2 and T3.
• Technical Programming - The parameters
contained within this level are ones
the operator can change to affect the
performance of the espresso machine.
These parameters are set in the factory
and their adjustment requires the
intervention of a service technician La
Marzocco reccomends that no changes
are made at this level. The Technician
Password is required for access.
Accessing Programming Mode
Programming Mode
G1█ MODBAR G2█
163Puls 0Puls