46
Display Operating Procedure
Description
“Barista” Programming
G1█ MODBAR G2█
163Puls 0Puls
1
When the espresso machine is turned on, press and hold the T3 button to access the “Barista” programming.
After about 5 seconds the following screen is displayed.
Group Dose
Settings
2
Press the T3 button to enter the doses programming procedure.
Dose Settings
Reset
3
Press the button T3 to conrm the procedure
Resetting
Doses...
4
Now all settings are cleared.
• This parameter allows the operator to
cancel all the doses set.
Program Dose
Group Dose
Settings
Dose Settings
Reset
To Next Page
Loading...
