57
Display
Operating Procedure
Description
“Barista” Programming
(only on ABR espresso machine models)
Group Dose
Settings
Scale
Configuration
Scale Configuration
• This parameter allows the operator to
view and manually change each dose for
each Selection Indicator.
• For greater accuracy and consistency of
the doses, it is recommended that you
set each Selection Indicator.
• The dose can be set by pulses or by
mass (weight).
Scale Settings
E xit
5
Press T1 or T2 until the display shows the exit menu, press the T3 button to return to the “Barista”
programming.
6
Press T1 or T2 to continue with the programming of the other parameters.
G1█ MODBAR G2█
163Puls 0Puls
7
Press T2 and T3 at the same time to exit the programming mode and return to the normal use of the
espresso machine.
To Next Page
Loading...
