modbar av Series - Page 71

EN
71
Display
Operating Procedure
Description
“Technical” Programming
Enter Password
1
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2
until the following screen is displayed.
Number of Groups
1
2
Press the T3 button to access the menu, then navigate using T1 and T2 to choose between 1 and 2,
press the T3 button to conrm the option.
3
Press T1 or T2 to continue with the programming of the other parameters.
E xit
Menu
4
To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is
displayed. Press the T3 button to exit the menu and return to the normal use of the espresso machine.
Enter Password
Number of Groups
1
• This parameter allows the technician to
set the number of groups.
Number of Groups