To Next PageTo Next Page
Need help?Do you have a question about the MODE M4 and is the answer not in the manual?
General| Number of falls | 4 |
|---|---|
| Lifting height | 3 m - 15 m |
| Lift Height | 3 m - 15 m |
| Chain Fall | 4 |
| Chain Size | 10 mm |
| Load Capacity | 4 ton |
Identifies hoist models, serial number location on body and electrical housing.
Lists and illustrates main chain hoist components with item numbers.
Explains load capacity and factors affecting chain hoist service life.
Refers to dimensional drawings for hoist size and weight specifications.
Details chain hoist connection accessories, including hooks and couplers.
Specifies environmental conditions: temperature, protection rating, pull angle, sound level.
Covers electrical connection procedures, including power supply and isolator switch.
Details installation of integrated chain bags, including fastening connectors and securing.
Outlines maintenance form: inspection items, frequency, and responsible personnel.
Provides guidance on component lubrication (chains, gears) with recommended intervals.
Explains chain inspection for wear, rust, corrosion, and replacement criteria.
Details hook visual inspection, opening measurement, and replacement criteria.
Lists components for inspection and potential replacement after storage or annual checks.
Presents technical specs (load, height, power, speed) and tightening torque data.
Describes decommissioning procedures for hoists reaching service life or requiring inspection.
Illustrates and lists parts associated with the hoist's housing assembly.
Shows exploded views and lists components for the hoist's mechanism and brake system.
