MODE M4 - Illustrated Catalogues; Housing Components

Mode
MODE 公司保留在不经通知的情况下改动和更版上述信息的权利。
牧德科技（北京）有限公司
30
Problems
Causes
Solutions
The chain hoist can’t work
normally
The emergency stop switch has
been activated
The emergency stop switch is
disabled
Trigger the fuse
Replace the fuse
Activate temperature control
(optional)
Allow cooling
The screws get loose at contactor
terminals
Fasten the screws up
Turn off the main switch
Turn on the main switch
The load can’t be increased
Overload
Reduce the load
The braking distance is longer
than 10cm
The brake lining is abraded
Replace the brake, and the
braking components if necessary
Abnormal noise is generated
when the load moves
Chain components are not
lubricated
Lubricate components
Chains are abraded
Replace the chains
Chain wheels or chain guides are
abraded
Replace the chain wheels or chain
guides
The driven chain wheels are
abraded
Replace the chain wheels
Power phases are missing
Inspect the connections of three
phases
10 插图目录表
10.1 外壳
10 List of Illustrated Catalogues
10.1 Housing