modec MC89 - Introduction

4
2. Introduction
This instruction manual must always be available and kept close to where the actuator will be
used.
This document is unique and is owned by the company modec. It cannot be corrected, modified
or duplicated without prior written agreement. This document should not be considered a
replacement for safety rules set out in the Work Code or in any other legislation that applies to
the site where the actuator is used.
It belongs to the operators to make sure that all security regulations applicable to both the work
site and the Portable Valve Actuator conditions of use are respected.
modec products are conceived and fabricated with the utmost care and attention for the safety
of both the operator and the equipment. This is certified by the declaration of conformity with
the relevant clauses in the European directive 2006/42/CE.
The actuators described in this document may evolve. We reserve the right to modify their
specifications, without prior notice. Updates will be available on our website www. modec.fr. It
is important to refer to the website before setting up or using the actuator, and before carrying
out maintenance. Any modifications made to the actuators or their accessories must be
approved in writing by modec.
Operators in charge of setting up, using or servicing modec actuators must have a reasonable
knowledge of the equipment. As well as carefully reading this instruction manual, they must be
competent in the valve sector and the particularities related to their work environment.
KEEP THESE INSTRUCTIONS
This manual contains important information and user instructions for the
following tools: Electric Portable Valve Actuator MC89x-xxx-xx.
It is IMPERATIVE that you read the whole of this user guide before using the tool or carrying
out any maintenance operations. Make sure you follow to the letter the instructions and
diagrams found in this document. Failure to adhere to the instructions contained in this
manual, and any modifications, omissions or the use of replacement parts that do not adhere
to the specifications set out in this manual, clears the manufacturer of all responsibility
related to the protection of people and equipment.