9
5. Safety equipment
Personal Protective Equipment :
Operators or anyone placed close to the actuators must wear the following protection. It is
incumbent on the company using the equipment to ensure that safety rules are respected.
Hearing protection Protective goggles Safety shoes Safety gloves
Safety signs :
Summary table explaining the pictograms found on the apparatus.
Warning ! Using this Read the notice, Risk of fire Do not use in the rain
material can be dangerous before use or in damp surroundings
6. Description and technical specifications
a. Portable Valve Actuator
1 – Information stickers : Indicate for each rotation direction (D1 & D2) the possible torque settings
depending on the Banjo head used
2 – Fixation ring to fix a strap for handling and carrying: Not for torque management.
3 – Flange: enables the attachment of all modec heads, adaptors and torque systems.
4 – Left/right switch – to choose rotational direction of the actuator.
5 – Start / Stop trigger: For a progressive start and to stop the actuator when released.
6 – Removable battery: The mains connection can also be plugged at this place.
7 – Isolated handle (grey zone) : Do not use as a torque reaction device.
8 – Speed control button (4 possible positions).
9 – Electronic torque limiter thumbwheel (13 possible positions).
10 – Revolution counter module (option): it gives a double reading – rotating speed and number of
turns.
To Next Page
Loading...