22
1. Introduction
Dear Customer,
Thank you for purchasing this product.
This product meets the requirements of current statutory, European and national guidelines.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
Observe all safety notes in these operating instructions. They contain important information
regarding the handling of the product.
You are solely responsible for the safe operation of your remote control and your model!
All company names and product names are trademarks of the respective owners. All rights reserved.
In case of any technical questions, contact or consult:
Tel. no.: +49 9604 / 40 88 80
Fax. no.: +49 9604 / 40 88 48
E-mail: tkb@conrad.de
Mon. to Thur. 8.00am to 4.30pm
Fri. 8.00am to 2.00pm
2. Intended Use
The 2-channel remote control system has been designed solely for private use in the model-making field and has
operating times appropriate to this use. This system is not suitable for industrial use, such as controlling machines or
equipment.
Any use apart from the use described above can damage the product and may lead to other risks, such as
short circuit, fire, electric shock, etc. Do not change or modify any technical aspects of the remote control
system. The safety notes must be observed at all times!
Observe all safety notes in these operating instructions. They contain important information regarding the
handling of the product.
You are solely responsible for the safe operation of your remote control and your model!
To Next Page
Loading...
Need help?
General
