English 34
Electric current requirements to operate the washing machine is 16 Amperes. You need to send
a specialized technician / certified to connect the fuse of 16 amperes when the electrical current is not
sufficient.
- Your washing machine is designed for a voltage of 220 Volt.
- Do not forget to check out the grounding every time you want to use the washing machine by
using transformer or without the use of transformer. Manufacturer is not responsible for
damage caused by the operation of the washing machine without grounding.
- To keep your washing machine ready before use, please call a technician for installation.
- For the first laundry please use detergent and do not putclothes into the machine. This is to
ensure that the remaining impurities from the production will be purged from the washing machine.
- The results of your washing machine depend on the effectiveness of soap used. Stains found on
the clothes may not be removed if the quality of the soapused less good. Please clean the stains
found on the clothes like described in this manual before washing in the washing machine.
Remove the washing machine from the carton and place the washing machine on a solid and flat
floor. Do not put the washing machine on a slant not flat place, on the carpet or hardwood floors. Do
not place the washing machine in the open air, and keep it away from damp areas that can cause
damage.
1. Removing the safety bolt on the back of the washing machine
- For the purposes of transport, the washing machine is
locked by using additional polyfoam. Before operating the
washing machine, remove the bolts blocking as shown
beside.
- Cover the blocking screw holes with
hole cover.
- Keep the polyfoam and blocking
screws for the purpose of transfer of
the washing machine and put it back
before the machine moved.
Part 3: Pre Step Before Installation
To Next Page
Loading...
