English 44
Whenever a new programme is selected, the maximum temperature for the selected programme
Appears on the temperature indicator. To decrease the temperature, press the temperature
adjustment button. Temperature will decrease gradually
Note : If the programme has not reached the heating step, you can change the temperature
without switching the machine to Pause mode .
- Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected
programme is displayed on the spin speed indicator. To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed decreases gradually. Then, depending on the model of the
product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function
selection" section for explanations of these options
Note: If the programme has not reached the spinning step, you can change the speed without
switching the machine to Pause mode.
- Program Options
Use the following auxiliary functions according to your daily needs. Select the desired auxiliary
functions before starting the programme. Furthermore, you may also select or cancel auxiliary
functions that are suitable to the running programme without pressing the Start / Pause button
when the machine is operating. For this, the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or canceled, light of the relevant auxiliary function
will blink 3 times to warn the user.
Attention!:
- Some functions cannot be selected together. If a second auxiliary function conflicting with the
first one is selected before starting the machine, the function selected first will be canceled
and the second auxiliary function selection will remain active. For example, if you want to
select Quick Wash after you have selected the Prewash, Prewash will be canceled and Quick
Wash will remain active.
- An auxiliary function that is not compatible with the programme cannot be selected. (See
“Programme and consumption table”)
- Auxiliary Function buttons may vary according to the model of the machine.
- Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save
energy, water, detergent and time
Note : Prewash without detergent is recommended for tulle and curtains.
- Quick Wash
This function can be used in Cottons and Synthetics programmes. It decreases the washing
times and also the number of rinsing steps for lightly soiled laundry.
Note: When you select this function, load your machine with half of the maximum laundry
specified in the programme table.
- Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you
may use rinse hold function to keep your laundry in the final rinsing water in order to prevent
them from getting wrinkled when there is no water in the machine. Press Start / Pause /
Cancel button after this process if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the water. If you want to spin the laundry
held in water, adjust the Spin Speed and press Start / Pause / Cancel button. The programme
resumes. Water is drained, laundry is spun and the programme is completed.
- Time Delay (In some models only)
With the time delay function the startup of the programme may be delayed up to 3, 6 or 9
hours.
Note: Do not use liquid detergents when you set time delay! There is the risk of staining of the
clothes.
Open the loading door, place the laundry and put detergent, etc. Select the washing
programme, temperature, spin speed and, if required, the auxiliary functions. Set the desired
time by pressing the time delay button. When the button is pressed once, 3 hours time delay
is selected. When the same button is pressed again, 6 hours delay is selected, and when it is
pressed for the third time, 9 hours time delay is selected. If you press the time delay button
To Next Page
Loading...
