English 46
level is suitable, Loading Door light illuminates steadily within 1-2 minutes and the loading
door can be opened. If the level is unsuitable, Loading Door light turns off and the loading
door cannot be opened. If you are obliged to open the Loading Door while the Loading Door
light is off, you have to cancel the current programme; see “Canceling the programme”.
- Changing the selections after programme has started
- Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode while a programme is
running. The light of the step which the machine is in starts flashing in the Programme Follow-
up indicator to show that the machine has been switched to the pause mode.Also, when the
loading door is ready to be opened, Loading Door light will also illuminate continuously
in addition to the programme step light.
- Changing the speed and temperature settings for auxiliary functions
Depending on the step the programme has reached, you may cancel or activate the auxiliary
functions; see, “Auxiliary function selection”.
You may also change the speed and temperature settings; see, “Spin speed selection” and
“Temperature selection”.
Note: If no change is allowed, the relevant light will flash for 3 times.
- Adding or taking out laundry
Press the Start / Pause button to switch the machine to pause mode. The programme follow-up
light of the relevant step during which the machine was switched into the pause mode will
flash. Wait until the Loading Door can be opened. Open the Loading Door and add or take out
the laundry. Close the Loading Door. Make changes in auxiliary functions, temperature and
speed settings if necessary. Press Start / Pause button to start the machine.
- Canceling the programme
To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be canceled. End / Cancel light will flash continuously to notify that
the programme has been canceled.
Your machine will end the programme when you turn the Programme Selection knob;
however, it does not drain the water inside. When you select and start a new programme,
the newly selected programme will start depending on the step the previous programme was
canceled in. For example, it may take in additional water or continue to wash with the water
inside.
Note: Depending on the step where the programme was canceled in, you may have to put
detergent and softener again for the programme you have selected a new.
- Program complete
When the washing program finishes the symbols onthe selected program will light followed by
indicator lights of "End" on the screen, indicating that the washing program has been completed.
To Next Page
Loading...
