Need help?Do you have a question about the Modern Sounds Pluto and is the answer not in the manual?
Instructions on powering on the Pluto synthesizer using the power switch and connecting to power.
Explanation of LED indicators for charging, low battery, and fully charged states.
How the CLOCK knob sets the base tempo for the five 'moons' modulation outputs.
Adjusting the timing relationship and randomness of 'moons' outputs with the SPREAD knob.
Modulating the pulse width of the 'moons' signals using the WIDTH knob.
Changing the order of output signals from left to right using the SHUFFLE control.
Details on how SEQUENCE 1 determines VOICE 1 frequency and its three operational modes.
How SEQUENCE 2 determines VOICE 2 frequency, including direction and step control.
Using the LEVEL input to modulate voice amplitude, normalled to the STEP input.
Detailed instructions for downloading and installing firmware updates using a computer and Teensy Loader.
Basic troubleshooting steps for Pluto, including reboot problems and contact information for support.
General| Type | Audio Interface |
|---|---|
| Input Channels | 2 |
| Output Channels | 2 |
| Phantom Power | Yes |
| Headphone Output | Yes |
| Connectivity | USB |
| Driver | ASIO |
To Next Page