Modern Sounds Pluto - Syncing Pluto to Other Devices; External Clock Synchronization; Sync Input Ports

Sync Pluto to other devices
Set CLOCK to external sync
Pluto can be synced to an incoming sync signal or MIDI
clock. To initiate sync to an external clock source,
turn the CLOCK knob to the full CW position.
MIDI clock in
Pluto receives MIDI clock data via the MIDI jack and USB MIDI.
To receive a MIDI clock signal with the MIDI jack, use the slide switch to
the left of the MIDI jack to select IN. The incoming MIDI clock is received
at 12 PPQN.
SYNC in
To receive a sync signal with the SYNC jack, use the slide switch to the
left of the SYNC jack to select IN.
26