Voice mode switch
Both of Pluto’s voices have three different modes. Use the toggle switch to
select a mode.
Voice 1
1. Classic – Blends from Sine to Triangle to Saw waveforms
2. Wavetable – Morphs between 32 different wavetables
3. Audio input
Voice 2
1. Classic – Blends from Sine to Triangle to Saw waveforms
2. Wavetable – Morphs between 32 different wavetables
3. Percussive – A blend of wavetable and FM oscillators
. Designed to
produce a range of percussive sounds. This voice has faster attacks,
some pitch envelopes, FM modulation, and noise. Gets some growly FM
sounds with longer envelopes.
VOICE knob
Turning the VOICE knob changes the timbre of the voice, blending waveforms
and sometimes attenuating the modulation.
Modulation input
Patching a signal to the modulation input will modulate the timbre and
sometimes the
frequency of the voice. Each voice mode handles modulation
differently. Like the LEVEL input, the envelope of the modulation signal is
automatically determined by the rate and pulse width of the input signal.
18
To Next Page
Loading...