5
04/99 AWB 27-1184 GB
1 About the PS4-200 Compact PLC
Hardware and software
requirements
Sucosoft S 40
To program the PS4-200 you need a PC (IBM or IBM-
compatible) with
at least a Pentium processor
a Windows 95, Windows 98 or Windows NT 4.0
1)
operating system
at least 16 Mbyte RAM
3.5
″
disk drive/1.44 MByte and CD-ROM drive
Hard disk with at least 40 MByte free capacity;
the temporary directory C:\ {_S40_}.TMP is
created during the installation and deleted again.
This requires at least 250 Kbytes free space on
drive C:
Serial ports (COM 1 to COM 4)
Parallel printer port (LPT1)
VGA graphics card
Programming cable ZB4-303-KB1 (connecting
cable between PC and PS4-200)
1) (Sucosoft 3.x is the last version supported by
Windows 3.1x)
To Next Page
Loading...
Need help?
General
