Safety Precautions
Safeandeffectiveuseofthisproductisveryimportant. Pleasereadthe
followinglasersafetyinformationbeforeattemptingtooperatethelaser.
Alsopleasenoteseveralspecificandunusualcautionarynotesbeforeusing
MOGLabslasers,inadditiontothesafetyprecautionsthatarestandard
for any electronic equipment or for laser-related instrumentation.
CAUTION – USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE
Laser output from the CEL/CEX/CEFcan be dangerous.Please ensure that
youimplementtheappropriatehazardminimisationsforyourenvironment,
such as lasersafety goggles, beam blocks,and door interlocks.MOGLabs
takesnoresponsibility forsafe configuration anduse ofthelaser.Please:
• Avoid direct exposure to the beam.
• Avoid looking directly into the beam.
• Notethesafetylabels(examplesshowninfigurebelow)andheed
their warnings.
• Whenthelaserisswitchedon,therewillbeashortdelayoftwosec-
onds beforethe emission oflaserradiation, mandatedby European
laser safety regulations (IEC 60825-1).
• TheSTANDBY/RUN keyswitchmustbeturnedtoRUN beforethelaser
can be switched on. Thelaser will not operate if the keyswitch
isintheSTANDBY position. Thekeycannotberemovedfromthe
controller when it is in the clockwise (RUN) position.
iii
To Next Page
Loading...
Need help?
General
