www.mokosmart.com
Default is disabled, when enabling it, please add the “➕” icon to
add filter items. It can add at most 5 items, and the relationship of
each item is “And”.
Data type: Data type of the Bluetooth raw data.
Data offset: Data offset in bytes under the data type, it can be
set to 0-0 or any value from 1 to 29, and the second value must
be greater than the first value.
Raw data field: A certain data field under the data type, and it
should match the data offset.
The function switch of filter condition A. Only when it is enabled,
the filter rule will take affect.
Default: -127 dBm, range: -127- 0 dBm
Default is disabled, when enabling it, please enter a full MAC
address or keyword.
Default is disabled, when enabling it, please enter a full ADV name
or keyword.
Default is disabled, when enabling it, please enter a full iBeacon
UUID or keyword.
Default is disabled, when enabling it, please enter the range value
of iBeacon major, and the second value must be greater than or
equal to the first value.
Default is disabled, when enabling it, please enter the range value
of iBeacon minor, and the second value must be greater than or
equal to the first value.
Default is disabled, when enabling it, please add the “➕” icon to
add filter items. It can add at most 5 items, and the relationship of
each item is “And”.
Data type: Data type of the Bluetooth raw data.
Data offset: Data offset in bytes under the data type, it can be
set to 0-0 or any value from 1 to 29, and the second value must
be greater than the first value.
Raw data field: A certain data field under the data type, and it
should match the data offset.
The function switch of filter condition A. Only when it is enabled,
the filter rule will take affect.
Relationship between
condition A and B
Both of the filter conditions are ON, the relationship can be set to
And or Or.
To Next Page
Loading...