MOKO MK107 - Ota

www.mokosmart.com
14
2.6 OTA
The gateway has the ability to update firmware over the air. After filling in the OTA information,
click the “Start Update” button, the gateway will enter the update process.
During OTA process, LED will flash yellow, if OTA succeed, LED turns solid green, if failed, LED turns
solid red.
Note: The OTA server (47.104.172.169:8080) in the above picture is just available for your test.
MOKO can also provide the update file, you can build your own OTA server to operate it.