MOKO MK107 - LED Status Option; Data Report Timeout; Network Status Report Period

www.mokosmart.com
12
2.5.1 LED Status Option
The LED indicator function in different device status can be configured.
Parameter
Description
Bluetooth advertising indicator
Default is enable, when it is disabled, the LED will be OFF
Bluetooth connected indicator
Default is enable, when it is disabled, the LED will be OFF
Server connecting indicator
Default is enable, when it is disabled, the LED will be OFF
Server connected indicator
Default is enable, when it is disabled, the LED will be OFF
2.5.2 Data Report Timeout
When the Bluetooth data packet reaches the specified length, the gateway will immediately report
the data packet to the server. When the Bluetooth data packet is less than the specified length,
the gateway will wait for the next piece of data. If the next piece of data is not scanned after the
timeout period, it will directly report the currently scanned data to the server.
Parameter
Description
Data report timeout
Default: 20, range: 0-60 (unit: 50ms)
2.5.3 Network Status Report Period
The gateway reports its network status to the server to notify the server that it is online. The
report interval can be configured.