www.mokosmart.com
The IP address or domain name of your server.
MQTT client id, each device connected to the server
should have a unique client id.
The gateway uses it to subscribe messages from the APP.
You can use the default topic directly or modify it.
If the topic of “Settings for APP” page has been set, it
should be set the same as the APP published topic.
The gateway uses it to publish messages to the APP. You
can use the default topic directly or modify it.
If the topic of “Settings for APP” page has been set, it
should be set the same as the APP subscribed topic.
Default: Enable, range: Enable/Disable
Quality of service. Default: 1, range: 0-2
Default : 60, range: 10-120
If access to your server doesn’t require a username and
password, it can be blank.
Enable means SSL mode
Disable means TCP mode
It supports three type of certificates:
CA signed server certification;
CA certificate file;
Self signed certificates
Each added device should have a unique device id.
NTP server IP or domain name, it can be blank, then
device will use the default NTP server.
Default: UTC+0, range: UTC-12 - UTC+12
2.2.2 Configure APP and Device connect to AWS iot
When configuring the gateway to connect to AWS iot, please enable the SSL/TSL option, then
select the certificate files locally from the mobile phone.
To Next Page
Loading...