MOKO MK107 - Set the Gateway Scan BLE Device

www.mokosmart.com
5
Since the certificate format required by the iOS APP is different from that of the Android APP, this
page of Android and iOS are slightly different (the left picture is the "MQTT settings for APP" page
of Android APP, and the right picture is the "MQTT settings for APP" page of IOS APP).
2.3 Set the Gateway Scan BLE Device
When the gateway is successfully connected to the server, it will automatically start scanning, and
the scanned data will be displayed on the page. The scan switch and scan time of the gateway can
be configured.