ImageXpress Confocal HT.ai High-Content Imaging System User Guide
10 5084773 A
Laser Safety
WARNING! LASER LIGHT. This symbol indicates that a potential hazard to personal
safety exists from a laser source. When this symbol appears in this guide, follow the
specific safety information related to the symbol.
The ImageXpress Confocal HT.ai system contains high-power laser products:
The external light source is a Class 4 high-power laser product.
The autofocus system uses a Class 3b high-power laser product.
Never attempt to open the instrument or access the high-power laser products. Installation and
service is to be performed by a Molecular Devices Field Service Engineer only.
The Class 4 laser product is designed and tested in accordance with IEC 61010-1, CAN/CSA
C22.2 Number 61010-1, CENELEC EN 61326-1:2006, and FCC Part 15 Subpart B, Class A.
Note: See www.89north.com/fluorescence-microscopy-products-by-brand/89-
north/ldi-laser-diode-illuminator for complete details on the external light source.
Item Description
Emitted Wavelength 405 nm - 730 nm
MaximumOutputPower 2 W
Laser Class Class4
Table S-2: External Laser Module Specifications (Light Source)
Item Description
Wavelength 690nm
Maximum OutputPower 20mW, continuous wave
Laser Class Class3b
Table S-3: Embedded Laser Module Specifications (Autofocus System)