Chapter 1: ImageXpressPicoAutomated Cell Imaging System
5063669 E 7
Documentation
Review the product documentation on the Knowledge Base, including installation guides and
user guides. In addition, online Help is available within the CellReporterXpress software.
Press F1 to access Help for the current page.
Additional Resources
Web-based microscopy courses:
www.leica-microsystems.com/science-lab
www.ibiology.org/ibioeducation/taking-courses/ibiology-microscopy-short-course.html
The Molecular Probes Handbook offers advice on fluorescent probes and can help you
determine if there are better stains available for your analysis:
www.lifetechnologies.com/us/en/home/references/molecular-probes-the-
handbook.html
Product Documentation
The following guides are available on the Molecular Devices Knowledge Base at
mdc.custhelp.com:
CellReporterXpress Installation Guide
CellReporterXpress Release Notes
CellReporterXpress User Guide
ImageXpressPico Pre-Installation Guide
ImageXpressPico Installation Guide
ImageXpressPico User Guide
ImageXpressPico Calibration Kit Guide
In addition, the CellReporterXpress software includes context-sensitive Help that you can
access from within the software. Just press the F1 key from within the software to view Help
for the current page.
Tip: Molecular Devices recommends that you review the documentation before
installing or using the ImageXpressPico system or the CellReporterXpress software.
About This Guide
This guide is intended for the scientist who receives a calibration kit along with the
aftermarket purchase of an objective or filter cube for the ImageXpressPico system. It
describes how to install and calibrate the objective or filter cube.
The information in this guide is subject to change without notice. Molecular Devices
recommends that you review the guide on the Knowledge Base for the most up-to-date
information.