Molecular Devices ImageXpress Pico Calibration Kit Guide

ImageXpress Pico Automated Cell Imaging System Calibration Kit Guide
16 5063669 E
Calibrating an Objective
After you install a new objective from an after-sales purchase, you must calibrate it. A
calibration kit, which is included with any after-sales objective purchase, includes the
following:
Fluorescent Bead Slide (9100-0099)
Red Plastic Slide (1-GP-7)
Green Plastic Slide (1-GP-8)
Orange Plastic Slide (1-GP-11)
You will need to provide the following item for the calibration process:
4-Slide Holder (5068503)
To calibrate an objective:
1.
In the CellReporterXpress software, on the Home page, click Devices.
2.
Click Show Device Options to expand the details for the device where you want to
calibrate an objective.
3. Click the Objectives tab.

Molecular Devices ImageXpress Pico Specifications

General

Brand	Molecular Devices
Model	ImageXpress Pico
Category	Laboratory Equipment
Language	English