Safety Warnings and Guidelines
Important information for safe use
Users should have a clear understanding of how to use this instrument before operation, please read
this manual carefully prior to operation.
Any improper operation may cause injuries or electric shocks. Please read
the manual carefully and operate safely according to the guidelines.
Security
The operation and maintenance of the instrument should comply with the basic guidelines and
warnings below. Incorrect operation or maintenance will have effect on life expectancy, performance,
and safety features of the instrument.
The instrument is generally an indoor instrument which conforms to the
class GB 4793.1 standard.
Please read this manual carefully before operation. The device must be
used by experienced personnel with certified training.
The operator should not repair the instrument in case any injury or out of
warranty. If service required, please contact MolGen or your local supplier
for repair.
Before powering on, please make sure the voltage of the power supply is
consistent with the required voltage. And make sure the rated load of the
power outlet is not less than required by the instrument.
If the power cord is damaged, replace it with the same type and
specification power cord. Do not cover anything on the instruments when
using. Insert and pull the power line with hand gently and make sure the
plug completely inserts to the jack.
The temperature of the heating block is high, please do not touch it during
the operation in case any injury.
To Next Page
Loading...