The instrument should be kept in an area with minimal dust, away from wet
areas and direct sunlight. In additional the installation location should have
sufficient ventilation, but away from electromagnetic interference and heat
sources. The vents on this instrument are designed for ventilation. Do not
cover them, as they may overheat. When many instruments are used at the
same time, the distance between each instrument should be more than
100cm.
Power off when not in use. If the instrument will not be used for a long
period of time, cover it with a cloth or plastic to protect it from dust.
Disconnect the power cord from the jack at once in the following cases, and
contact your local supplier or MolGen:
⚫ Liquid enters into the Instrument;
⚫ Instrument was rained or watered;
⚫ Abnormal operation: such as abnormal sound or smell;
⚫ Instrument was dropped or the outer shell is damaged;
⚫ The function has obviously changed.
Maintenance
The instrument should be cleaned regularly using a soft cloth with a small amount of alcohol. If there
are any stains on the surface of the instrument, wipe it with soft cloth with cleansing cream.
Transportation and storage requirements
Ambient temperature: 10℃ ~ 35℃
Relative humidity: ≤70%
Atmosphere pressure range: 500 ~ 1060hpa
Locate it in a well-ventilated room, away from corrosive gas.
To Next Page
Loading...