EasyManua.ls Logo

Molift PARTNER 230 - Toileting Procedures

Molift PARTNER 230
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 16 of 24
BM03 - English - Molift Partner 230/255 - Rev. G/ 02/2008
Toileting
The Easy Toilet Sling is used with the standard 4-
point suspensions.
Easy Toilet sling is a toilet sling with a thick-
er and wider upholstery. It is also available
with head-support. The Molift Easy Toilet
Comfort sling is easier to fit in narrow en
-
vironments, and is available with a separate
head support
The toilet sling is tted as follows:
Insert the sling behind the users back with the
grey side away from user.
Fasten the belt rmly around the users body.
Place the leg section under the front part of the
thighs and pull the loops up between the thighs.
On Molift Easy Toilet Comfort, place the leg
section over and down between the thighs and
pull outwards from the inner part of the thighs.
The leg sections of Molift Easy Toilet Comfort
Sling are fitted to separate the legs, therefore
they should not be crossed as the other Easy
slings.
Hook the four loops on the suspension as for oth-
er slings.
Position the lifter around the toilet and lower the
user.
Pull the leg sections out of the way. The sling can
be left on during bathroom use.
Alternative
By pulling the leg sections from the outside
and in, you will achieve a wider leg posi
-
tion.

Related product manuals