Page 8 of 24
BM03 - English - Molift Partner 230/255 - Rev. G/ 02/2008
Checklist before use
• Check that the lifter has no apparent damage or
other faults, especially that the suspension has no
damage or cracks.
• Ensure that the lifting arm and lifting column are
properly xed and that there is no loose parts on
the lifter. The lifting column must be xed tight
in the chassis attachment.
• Check that the emergency button is deactivated
and that the lifter works.
• Check that you have sufciently charged batter
-
ies to complete the task you have planned.
• Check that the servicelamp gives a green light
indicating it is ready for use. If the servicelamp
gives a yellow or red light, the lifter needs serv-
ice.
Make sure that the suspension has no dam-
age or cracks, and that the lifting arm and
column is properly fixed before use!
Disassembly
The Molift Partner 230/255 can easily be disassem-
bled in three main parts (battery not included).
• Remove the battery.
• Remove the lifting arm with rubber protection by
pulling the locking handle up and forwards while
lifting off the lifting arm.
• Release the lock handle on the chassis, and then
lift off the lifting column.
It is recommended that the emergency stop is
activated during storage for safety reasons.
To Next Page
Loading...
