To Next PageTo Next Page
Need help?Do you have a question about the MONARCH INSTRUMENT PLT200 and is the answer not in the manual?
General| Brand | MONARCH INSTRUMENT |
|---|---|
| Model | PLT200 |
| Category | Measuring Instruments |
| Language | English |
Details potential eye injury and visual interference risks associated with the device's laser beam.
Provides essential safety advice for device operation and precautions for child supervision.
Instructions for cleaning shafts and applying reflective tape for non-contact measurements.
Steps for selecting and installing contact tips or wheels for direct contact measurements.
Shows how to connect various external sensors like optical, infrared, and magnetic sensors to the device.
Procedures for performing measurements using the laser or an external optical sensor.
Procedures for performing rotational and linear measurements using contact accessories.
Step-by-step guide to configuring tachometer settings, including units and decimal places.
Explains how to perform tachometer measurements, recall max/min values, and power off the device.
Guide to setting up the rate measurement mode, including unit selection and wheel configuration.
Details how to perform rate measurements and recall maximum and minimum recorded values.
Guide to configuring the totalizer mode, including unit selection and decimal place settings.
Describes how to operate the totalizer, recall recorded values, and manage device power.
Guide to setting up the timer mode, including function selection and unit configuration.
Explains how to operate the timer in Manual and Auto modes, and how to reset the timer.
