WHEN WE SPEAK ABOUT LED’S WE REFER TO THE 2 LED LIGHTS
ONE RED AND ONE BLUE THAT ARE UNDERNEATH
THE RESET BUTTON.
9. LED INDICATIONS
LED indication Description
Pulsing RED Battery is being charged
Solid RED Battery is fully charged
Blinking RED
Device is connected via Bluetooth to the
Monimoto App (only when App is opened)
Short RED flash followed by 2 second
BLUE flash
Device is successfully reset to default
Solid BLUE for 3 SECONDS and then
TURNS OFF
Device has been switched OFF
Both BLUE and RED LED’s blink once
every 3 seconds at same time
Device is in DFU (Device Firmware Up-
date) Mode. If you see this indication please
contact our support team using in-App
message/Chat or via email to
support@monimoto.com
19
To Next Page
Loading...
