EasyManua.ls Logo

Monimoto 9 - Where to Install Monimoto

Monimoto 9
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. WHERE TO INSTALL MONIMOTO
Monimoto is intended to be placed on your vehicle in order to track it down in case of theft.
After completing the App setup process, now it’s time to attach it to your property. Here are
some tips for best GPS and Cellular Signal Reception:
1. Make sure no metal is contacting logo side of the device, it will directly
cause interference.
2. It is recommended to have the logo side of the device directed sideways
or up towards the sky - if it is facing down to the ground then it will have
diculty finding satellites.
3. When testing an alarm you must do so by simulating an actual theft where you
ride with the vehicle outside on the street for about 10-15 minutes. If the device
is located inside a building/garage/workshop/underground during the alarm test
then it will not get GPS signals and instead rely on GSM approx triangulation
locations. Buildings cause interference to GPS signals.
4. If the device is surrounded on all sides by lots of metal, it could interfere with
its ability to get signals, try dierent positions in the vehicle. Usually it takes
some experimentation to find a good location where it is hidden and also able to
receive GPS signals.
7

Related product manuals