Mooer GE300 - REVERB Parameters

Parameter
Explanation
Value
Pre Delay
Delay time before the first reflections can be heard.
0ms – 200ms
Decay
0 - 100
Low Cut
High Cut
Mix
Output Mode
Quality
Rate
(Filter-Reverb/Fl-Reverb/Mod)
Peak
(Filter-Reverb)
Q
(Filter-Reverb)
Filter Output
(Filter-Reverb)
Feedback
(Fl-Reverb)
Mod Delay
(Fl-Reverb)
Mod Output
(Fl-Reverb/Mod)
Attack
(Swell-Reverb)
Spring Length
(Spring)
Spring Depth
(Spring)
Depth
(Mod)
Length of the reverb trails.
Low frequency EQ shelf.
High frequency EQ shelf
Volume level of the reverb effect. 0 is total dry sound. 100 is killed dry total reverb.
Choose between Mono and Stereo. Stereo uses more CPU%.
Choose between standard quality and high quality. High quality uses more CPU%.
Adjusts modulation speed. 100 is the fastest.
Adjusts the frequency of the filter peak.
Filter bandwidth. High Q = narrow bandwidth.
Adjusts the volume level of the filter applied to the reverb trails.
Adjusts the feedback intensity of the flanging.
Adjusts the feedback frequency of the flanging.
Adjusts the modulation mix on the reverb trails.
Rate of automatic volume swell of the reverb effect. 100 is the fastest.
Simulated size of the springs in the spring tank.
Mix of the spring sound in the reverb trails.
Adjusts the modulation width of the reverb trails.
Off, 1Hz – 800Hz
Off, 20000Hz – 1000Hz
0 - 100
Mono, Stereo
Standard, High
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
Shimmer
(Shimmer)
Volume level of the shimmer harmonization.
Gain
(Dist-Reverb)
0 - 100
Dist lvl
(Dist-Reverb)
Tone
(Dist-Reverb)
Cab
(Dist-Reverb)
Adjusts amount of distortion.
Adjusts the mix level of the distortion.
Adjusts the EQ of the distortion.
Adds tone compensation to the distortion for output to full range rigs.
0 - 100
0 - 100
0 - 100
0 - 100
61