1、FADE：
FADE OUT time control. Rotate to adjust the fade out time. Rotate to 7 o'clock to turn off the fadeout
function. The fade out time duration can be set to up to 10 seconds.
2、THRESHOLD：
Adjust the sensitivity of the AUTO REC function. Rotate to 7 o'clock to turn off the auto recording
function. It is recommended to adjust it according to your playing preferences.
3、PLAY：
Looper playback volume level control, Rotate to 12 o'clock and the playback volume and thereal-time
playing volume will be the same. lt supports up to +6dB volume level boost.
4、REC：
Looper recording volume level control. Rotate to 12 o'clock and the playback volume and thereal-time
playing volume will be the same. lt supports up to +6dB volume level boost.
5、SAVE：
Press to go through preset slots 1-7. Press and hold to save currently recorded tracks.
6、SONG：
LOOPER X2 has 11 song banks. Each bank has 7 save slots (corresponding to the 7 LED indicators)
Rotate to cycle through the 11 banks.
Notes: In banks 1-9, the maximum recording time of each slot is 2.5 minutes. In banks 10 and 11.the
maximum recording time of each slot is 10 minutes.
04
To Next Page
Loading...
