Mooer LOOPER X2 - External and Power Ports

15、OUTPUTR：
1/4"mono (TS) audio jack, it is also the right channel of stereo setup.
16、EXTCTRL：
1/8"TRS jack, for connecting to external treble footswitch pedal (Need to purchase separately)
17、TYPE-C：
For connecting to computer for data transferring, firmware update.
18、DCIN：
Connect to 9V and at least 300mA current draw, center negative power supply. Original powersupply
is recommended, lsolated power supply is recommended to avoid unexpected noisecaused by power
supply sharing.
06