EXPLORING LABYRINTH (Continued)
LOW PASS BAND PASS
Finally, play with FILTER MODE to morph the filter response between lowpass
(LP) and bandpass (BP). A lowpass filter will attenuate all frequencies above the
VCF CUTOFF frequency, while a bandpass filter will attenuate frequencies both
above and below the VCF CUTOFF frequency.
BRINGING THE PATHS TOGETHER
Both signal paths—the additive VCW path and the subtractive VCF path—are
mixed together via the BLEND crossfader control. As your sequence plays,
adjust the BLEND control as you simultaneously play with the VCW FOLD
and VCF CUTOFF controls to explore the timbral space between these
parallel paths.
23
To Next Page
Loading...
