Moog One

41
ENVELOPES (Continued)
ATTACK (1 M-SEC to 10 SEC)
The ATTACK knob determines the amount of time required for the
control signal to rise from zero to its maximum level once a key is
pressed or a gate is initiated. Rotating the knob to the right will increase
the Attack Time.
DECAY (1 M-SEC to 10 SEC)
The DECAY knob determines the amount of time required for the
control signal to fall from the maximum level achieved by the Attack
stage before reaching the Sustain Level when a key is held or a gate is
open. Rotating the knob to the right will increase the Decay Time.
SUSTAIN (0 to 10)
The ATTACK, DECAY, and RELEASE knobs control the amount of
time needed to complete their respective stages. The SUSTAIN knob
instead controls the level that the Envelope control signal will maintain
while a key remains pressed (or a gate remains open). Higher values will
produce a higher Sustain Level.
RELEASE (1 M-SEC to 10 SEC)
After the key is released (or the gate is closed), the Envelope enters
the Release stage. The RELEASE knob determines the amount of time
required for the control signal to fall from its current level back to zero.
Rotating the knob to the right will increase the Release Time.
NOTE: If the key is released (or the gate is closed) before the Attack
and/or Decay stages are complete, the Envelope will simply advance
to the Release stage.