Functional
FUSE
magazine containing a power supply fuse
Please appreciate that while some users may report improvements in the performance
of their audio equipment when original parts are replaced with after market parts, MOON
cannot guarantee the proper functioning of its products under such conditions. Our
engineers have ensured that the original fuse should protect your device from catching
fire due to electrical calamities. All security, quality, and performance testing, as well as
standards certification, is performed with specific components, and any modification
from the original design may void its warranty.
POWER
switch for toggling the device on [I] and off [O]
With the power switch on, the unit may be toggled in and out of Standby using the
button on the front panel or by MOONLink. The unit may require up to a minute to
connect to the network. For best performance, the device should remain powered up
and may be toggled into Standby when not in use. It should be powered down during
extended absences by disconnecting the power cable.
Always power on the preamplifier before the power amplifier.
Always power off the power amplifier before the preamplifier.
AC INPUT
for connecting the power cable
NETWORK
network (RJ-45) connections for Ethernet cables
• for MOONLink functionality with compatible MOON products
• for extending the network to an additional device (eg, another 761, a NAS device, or a TV)
• for connecting the device to a network router
12V TRIGGER
mini-jack (TS) connection for synchronizing Standby behaviours across multiple devices
• Use 12V TRIGGER IN to connect a preamplifier.
• Use 12V TRIGGER OUT to daisy-chain this unit to the 12V TRIGGER IN on an additional power
amplifier (eg, when using two units as monoblocks).
STDBY MODE
switch for powering down some of the electronics while in Standby
• Select REG (recommended) to reduce the amount of time necessary to reach optimal playing
conditions.
•
LOW
to reduce energy consumption when not in use.
To Next Page
Loading...
