robot moves out and produces some high-pitched sound. In the end,
a report is generated on the App.
Add-on tools
Scout is also a robotic development platform. A UART port is available
on the top of the robot. Remove the metal panel, the UART port is
accessible. One can use 3D printing to design new tools for Scout.
From LED torch to toy gun, to a robotic arm. Only imagination is the
limit. Complex tools may require C/C++ programming. Scout’s
robotic control layer is open source. For serious developers, please
contact us at contactus@moorebot.com for more information.
Contact us
If you need help, please don’t hesitate to contact Moorebot Support
customerservice@moorebot.com or call +1 (858) 832-2587.
Warranty
The review your warranty coverage, please visit www.
Moorebot.com/pages/warranty.
Disposal of the Device
At the end of the product life cycle, you should not dispose of this
product with normal household waste. Take this product to a collection
point for the recycling of electrical and electronic equipment.
Please contact your local authorities in case you need more
information on the collection points in your area.
To Next Page
Loading...
