Recovery
Recovery restores the factory settings including the operating
systems. Once recovery is performed, users need to OTA update the
firmware to the latest version again.
To perform recovery, press both “RESET” and the “POWER” buttons
simultaneously for >3 seconds. (Recommend to press the REST
button first.) The LED indicators blink for several minutes until the
robot shuts down. Manually power up the robot again. The LED
indicators blink for several minutes again. When the blink stops, the
recovery is complete.
Connecting Scout
What you need:
Smartphone or tablet with Android OS 6.0 and later or iOS 11.0
and later. The smartphone shall support the 5GHz band of the
Wi-Fi.
Wireless network (for Wi-Fi Router mode)
Download Scout App
For Android devices
Go to Google Play Store, search for “Moorebot Scout”, then download
and install the App on your Android device.
For iOS devices
Go to App Store, search for “Moorebot Scout”, then download and
install the App on your iOS device.
Scout can be controlled using the IOS or Android App only not from a
PC or MAC.
To Next Page
Loading...
