Pre Start Inspection and Operation
3.4
• The overow bottle is a non-pressurized container that is only for any high heat
overow. Do not add coolant to this container. It will not be drawn into the engine.
• If coolant is required, make sure to add the proper coolant as shown in the Engine
Manual.
5. Inspect the radiator to make sure that the air ow is not blocked. The fan located
on top of the unit is a suction fan, which draws air from inside the machine. Check
the engine side of the radiator (Figure 3–5) to make sure that debris has not been
sucked against the radiator blocking air ow.
DO NOT check until the engine radiator is cool to the touch.
1
Figure 3-4 Filler Cap
To Next Page
Loading...
